Not works on old Zigbee2MQTT version such as 1.24.0, tested works on Zigbee2MQTT 1.28.4.

Due to a bug in Zigbee2MQTT, all the 5 sockets (inc. USB) turn on/off together, also ZigBee interview is not successfully. See https://github.com/Koenkk/zigbee2mqtt/issues/12442.

Note: After upgrade Zigbee2Mqtt, you may need to remove the device and add it again.

Brand: Jonvoo / UseeLink
model: SM-SO306-K (recognized as SM-0306E-2W by Zigbee2MQTT)


Also known as: ZigBee Extension Lead Smart Power Strip USB Surge Protector Smart Plug Voice Control Compatible with Alexa Google Assistant, Remote Control,APP Individual Control ,Timing Schedule Overload Protection

link: https://www.zigbee2mqtt.io/devices/SM-03...m-0306e-2w

Issues: the USB output is not properly designed, it causes RCD tripped in my use case. The viewsonic projector is connected to first socket and connected to a Google TV. As long as the Google TV USB power cable connected to the USB power port, it trips the RCD. This indicates the USB power is not properly designed, it is likely provide the current leakage path between earth to Neutral/Line and tripped the RCD protector. There is a small chance something wrong with my Viewsonic X10-4K projector or Google TV design, and caused the RCD tripped. The real reason is unclear to me.

• Error:
  

• Log:
  

   

LTM270HL01 Backlight System
Lamp Position Edge light type (Right side)
Lamp Type WLED
Lamp Amount 13S3P
Lamp Shape 3 strings
Lamp Life Time 40K(Min.) (Hours)
Lamp Voltage 42.9±3.9V
Lamp Current 130mA (Typ.)
Lamps Power Consumption 16.73W (Typ.)
Interface Type Connector

Reference: https://www.lcds-screen.com/products/LTM...meter.html

It is caused by the thermal cut out of the transformer.

The transformer is running warmmer than the others.

Reggiani (art 9282) AC 12v 50VA transformer for halogen MR16 lights.

   

   

• Walk assistant
  

• Clear trip computer 
  

• Enter setting menu
  

• Full user menu
  

LEDVANCE 4058075460935 20W LED Floodlight with PIR Sensor, 3000K, Warm White, 2200lm, IP65, White

FL PFM 20 W 3000 K SYM 100 S WT


  4058075460935_FL_PFM_20_W_3000_K_SYM_100_S_WT_en.pdf (Size: 678.03 KB / Downloads: 0)

   

   

   

   

• Switch position 0: power consumption 0W
  
• Switch position 1: power consumption 4W, bubble
  
• Switch position 2: power consumption 60W, bubble, vibration and heating, light on
  

Recently built a PC with ASUS PRIME B550M-K mother board and AMD 5600G CPU.

The monitor have to be connected and powered on before mother board, otherwise no display output at all three monitor outputs, and PC/motherboard needs to be power cycled to fix the issue. In my use case, the monitor is shared with other PC, so quite often, it is "not connected" and I have to power cycle the PC which sometimes results in lost unsaved work.

BTW, The ASUS PRIME B550M-K mother board works fine with AMD 5600G CPU.

How it works:

(Ikea button) -> ZigBee USB dongle -> ZigBee2mqtt -> Mosquito-> HabApp -> Raspberry Pi 4

->Pi actions:

• Play Dingdong sound (MP3) via Bluetooth speaker
  
• Press wireless doorbell button via relay
  
• Send doorbell pressed SMS message
  
• Send doorbell pressed email message