Gear Lever with central arm rest removed
remove the 12v socket which blocks the way to move the break latch (break position detection)
Turn and disconnect/remove the break latch from the gear level module
remove the tab holding the link bar between lever module and the gear box
disconnect the link bar between gearbox lever module and the gear box
Seperate the white/cream cover of the gearbox lever module.
it is very strongly gluded down to the black base.
I use a knife to slowly separate them. This is the most difficult part to me, takes me more than 1 hours.
I forgot to take a picture, so borrow a picture from online.
gearbox lever module with cover removed
remove soft cream/white protection cover
remove black control box(pcb inside)
to be continoued ...
Open the black control box
to be continoused ...
Zoom in
to be continued ...
PCB backside detailed photo
[attachment=552]
remove the 12v socket which blocks the way to move the break latch (break position detection)
Turn and disconnect/remove the break latch from the gear level module
remove the tab holding the link bar between lever module and the gear box
disconnect the link bar between gearbox lever module and the gear box
Seperate the white/cream cover of the gearbox lever module.
it is very strongly gluded down to the black base.
I use a knife to slowly separate them. This is the most difficult part to me, takes me more than 1 hours.
I forgot to take a picture, so borrow a picture from online.
gearbox lever module with cover removed
remove soft cream/white protection cover
remove black control box(pcb inside)
to be continoued ...
Open the black control box
to be continoused ...
Zoom in
to be continued ...
PCB backside detailed photo
[attachment=552]