Replace Grundfos UPS 15-50 130 center heating circulation pump - Printable Version +- rusty ox (https://rusty-ox.swavesey.org) +-- Forum: Swavesey (https://rusty-ox.swavesey.org/Forum-Swavesey) +--- Forum: Rusty Ox (https://rusty-ox.swavesey.org/Forum-Rusty-Ox) +--- Thread: Replace Grundfos UPS 15-50 130 center heating circulation pump (/Thread-Replace-Grundfos-UPS-15-50-130-center-heating-circulation-pump) |
Replace Grundfos UPS 15-50 130 center heating circulation pump - RustyOx - 10-09-2022 Issue: not hot water; boiler runs a short time and shutdown; hot water pipe stay cool, no water flowi sound. The pump is not spinning which can been checked after take off the front screw. Old pump Grundfos UPS 15-50 130 [title_image] [attachment=929] New pump Grundfos UPS3 15-50/65 130 : Come with two rubber washers, and exactly the same fitting size (130mm) as the old pump. [attachment=926] [attachment=928] Hot water is back after replaced the water pump. Water temperature chart in OpenHab. [attachment=936] Tools: You will need both 52mm pump spanner for the pump nut and a plumber spanner for hold the pump body to the position from spinning. [attachment=927] As long as you have the right tools, this job is pretty easy to DIY. Please make sure drain the centre heating before doing the job. I started with shutting off the isolation valves, but there are still fairly amount of water came out and wet the carpet, then I decided to drain the centre heating system to stop the water. 52mm pump spanner is available on Amazon (affiliate link): https://cooking.swavesey.org/visit.php?pmid=62612&step=1 |